BUILDENT RX-11-Solid Contents 55%

FORMULA : RX-11 55% Solid Content
ORIGIN : Korea
PACKING : 1.100kg / IBC;230kg / drum;bulk(21.000kg)
APPLICATION : Excellent slump retention for all grade concrete.

Short description

BUILDENT RX-11 is PCE that has excellent slump retention performance of concrete. In general, it can be blended with other water reduction type PCE in order to enhance concrete quality. It also can be used itself especially for the jobsite where requires much longer slump retention. The optimum dosage of BUILDENT RX-11 may depend on specific requirements of concrete properties and materials. So, it is determined by trials using the materials and conditions. ■ Compatibility BUILDENT RX-11 is compatible with all of PCE products. To achieve higher water reduction, you may blend with other PCE which has its specific properties. BUILDENT RX-11 is compatible with Ligno base plasticizer. Do not use blending with NSFC base superplasticizer. Features ■ Excellent slump retention for all grade concrete to be used with other water reducers ■ Applicable for all grade concrete to be used with other water reducers ■ High workability without bleeding or segregation
Description

BUILDENT RX-11

Polycarboxylate Ether for Superplasticizer(PCE)

Technical Data

BUILDENT RX-11

Polycarboxylate Ether for Superplasticizer(PCE)

BUILDENT  RX-11  is  PCE  that  has  excellent  slump  retention  performance  of  concrete.

In general, it can be  blended  with  other  water  reduction  type  PCE  in  order  to  enhance  concrete  quality.  It  also  can  be  used  itself  especially  for  the  jobsite  where  requires  much  longer  slump retention.

The optimum dosage of BUILDENT RX-11 may  depend   on   specific   requirements   of     concrete properties and materials. So, it is determined  by  trials  using  the  materials  and conditions.

Physical  Properties

      Physical  Properties  of  BUILDENT RX-11

Appearance

Faint  Light  Yellow Solution

Odour

Characteristic Odour

Total  Solid  Contents, %

55%(w/w), approx

pH(undiluted)

5.8

Specific Gravity

1.115

Viscosity

(Brookfield  Viscometer, cps)

550

Compatibility

BUILDENT RX-11 is compatible with all of PCE products.

To achieve higher  water  reduction,  you  may  blend with other PCE which has its specific properties.

BUILDENT RX-11 is compatible with Ligno base plasticizer.

Do not use blending with NSFC  base superplasticizer.

Features

Excellent slump retention for all grade concrete to  be used with other water  reducers

Applicable for all grade concrete to be  used  with  other  water reducers

High  workability without  bleeding  or segregation

Advantages

Allowed long range transportation of fresh concrete  with  its  excellent  retention ability

Provide fresh concrete with excellent retention more  than  120 minutes.

Reduction of labor costs by high workability of concrete

Storage  and Handling

BUILDENT RX-11 should be stored at room temperature  and  it  should  be  avoided  from direct sunlight. If stored in original unopened container, it will have a shelf life of twelve (12) months. If product is  frozen,  please  agitate  it  slowly  until  melting again.

Packaging standard

Bulk (21,000kg)

1,100kg / IBC

230kg  / Drum

Guidance  for use

Application

BUILDENT RX-11 is  recommended  to  be  used  blending with other PCE having high water reduction.

For the jobsite where requires much longer slump retention, the dosage ratio of  BUILDENT  RX-11  should  be  increased  up  to 75%.

Health  and Safety

BUILDENT RX-11 contains no hazardous  materials  and is completely transport  class free. However,  it   is recommended to use standard handling procedures with the product. Wear  gloves  and  eye  protection  and  wash  splashes  to  the   skin with soap and water at the end of shifts or at  breaks.  For  further  information  consult   the Material  Safety  Data  Sheet for  this product.

Video
Comment
YOUR COMMENT

Other products

FORMULA: HAIMASED 95% & 99%
ORIGIN: China
PACKING: 25/50kg/bag
FORMULA: NaH2PO2.H2O
ORIGIN: China
PACKING: 25kg/bag
FORMULA: CaCl2
ORIGIN: China; Vietnam
PACKING: 25kg / bag; 50kg / bag
FORMULA: ACYMA-R630-Solid Content 55%
ORIGIN: Korea
PACKING: 1.100kg / IBC;230kg / drum;bulk(21.000kg)
FORMULA: C4H11NO2
ORIGIN: Germany/Malaysia
PACKING: 225 kg/drum 225 kg/phuy
FORMULA: C12H27O4P
ORIGIN: China
PACKING: 200 kg / steel drum
FORMULA: H3BO3
ORIGIN: USA
PACKING: 25kg/bag
FORMULA: CaO
ORIGIN: Vietnam
PACKING: 50kg/bag
FORMULA: C9H21NO3
ORIGIN: China/Germany/USA
PACKING: 200 kg/drum
FORMULA: Cu2P2O7
ORIGIN: China
PACKING: 25kg / bag

                    Giấy phép kinh doanh số : 0304920055 cấp ngày : 05/04/2007 bởi Sở Kế Hoạch và Đầu Tư TP.Hồ Chí Minh

                    Người đại diện : ông Phạm Đình Chung